GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 772343  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the backup lamp switch electrical connector (3).

  3. Object Number: 761484  Size: SH
  4. Remove the backup lamp switch.

Installation Procedure

    Caution: Refer to Component Fastener Tightening Caution in the Preface section.


    Object Number: 761484  Size: SH

    Note: The backup lamp switch has pre-applied thread sealant on the threads.

  1. Install the backup lamp switch.
  2. Tighten
    Tighten the switch to 37 N·m (27 lb ft).


    Object Number: 772343  Size: SH
  3. Connect the backup lamp switch electrical connector (3).
  4. Lower the vehicle.