Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the engine shield. Refer to Engine Shield Replacement .
3. Remove the oil pan slid plate. Refer to Oil Pan Skid Plate Replacement .

1

Transmission Fluid Cooler Pipe Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb in)

2

Transmission Fluid Cooler Pipe Bracket

3

Transmission Fluid Cooler Pipe Push Retainer

4

Transmission Fluid Cooler Pipe Push Retainer.

5

Transmission Fluid Cooler Pipe Assembly

Procedure

1. Disconnect the transmission lines from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
2. Note the routing of the transmission line to ensure proper installation.
3. Inspect the transmission fluid level. Refer to Transmission Fluid Check .