Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement Non-HP2
Special Tools
J 39400-A Halogen Leak Detector
Removal Procedure
- Disconnect the electrical connector from the A/C refrigerant pressure sensor.
- Remove the A/C refrigerant pressure sensor (1) from the condenser tube.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the A/C refrigerant pressure sensor (1).
Tighten
Tighten the switch to 6 N·m (53 lb in).
- Connect the electrical connector to the A/C refrigerant pressure sensor.
- Leak test the fittings of the components using the
J 39400-A .
- Lower the vehicle.