Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement.
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Separate the HVAC module assembly.
- Remove the air temperature separator plate (5) from the HVAC module assembly (10).
- Remove the lower mode door (9) from the HVAC module assembly (10).
Installation Procedure
- Install the lower mode door (9) to the HVAC module assembly (10).
- Install the air temperature separator plate (5) to the HVAC module assembly (10).
- Install the HVAC module assembly halves.
Caution: Refer to Fastener Caution in the Preface section.
Note: For every heat stake removed ensure that you install a screw.
- Install the screws to the HVAC module assembly.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement.