Preliminary Procedure

1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.
2. Remove the accessory switch assembly. Refer to Accessory Switch Replacement.
3. Disconnect the electrical connectors.

1

Heater and Air Conditioning Control Assembly Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Heater and Air Conditioning Control Assembly

Tip
HVAC Control Module must be reprogrammed. Refer to Control Module References.