GM Service Manual Online
For 1990-2009 cars only

Object Number: 1843595  Size: MF

Callout

Component Name

Preliminary Procedure

    • Using the J 7079-2 , remove the bearings from the front case half.
    • Ensure the bearings are installed squarely into the bearing bores.

1

Transfer Case Shift Detent Lever Bearing - Inner

Tip

    • Ensure the printing on the bearing is facing upward.
    • Install the bearing using the long side of the DT-48215 .
    • Press the bearing until the tool bottoms on the front case half.

Special Tools

    • DT-48215 Shift Detent Lever Bearing Installer
    • J 7079-2 Universal Driver Handle - Non-Threaded

For equivalent regional tools, refer to Special Tools.

2

Transfer Case Shift Detent Lever Bearing - Outer

Tip

    • Ensure the printing on the bearing is facing upward.
    • Install the bearing using the short side of the DT-48215 .
    • Press the bearing until the tool bottoms on the front case half.

Special Tools

    • DT-48215 Shift Detent Lever Bearing Installer
    • J 7079-2 Universal Driver Handle - Non-Threaded