To replace a headlamp bulb:
- Open the hood. See
Hood Release
for
more information.
- Remove the two pins on the top of the headlamp
assembly. To remove the outer pin, turn outward and pull it straight up. To remove
the inner pin, turn it in and pull it straight up.
Low-Beam
Headlamp
High-Beam Headlamp
- Pull the headlamp assembly out.
- Unplug the electrical connector.
- Turn the old bulb counterclockwise and remove it from the headlamp assembly.
- Put the new bulb into the assembly and turn it clockwise until it is tight.
- Plug in the electrical connector.
- Reinstall the headlamp assembly.
- Reinstall and tighten the two pins.