If your vehicle is equipped with a tonneau cover, follow the directions below to remove the cover.

1. To remove, unsnap the cover. Roll it up and stow it using the buckle and the strap located at the front of the box.




Back rail

Side rail

Rear bow

Front bow

Front rail

2. Remove the tonneau cover from the notch in the front rail on the driver's side of the vehicle.



3. Remove the two bows by gently pushing them against the spring-loaded end. The two bows are labeled front and rear to remind you of the order in which to reinstall them.




To add cargo to the box, remove all bows and the back rail and stow them safely.

To clean the tonneau cover, use mild soap and water. If necessary, use a soft bristle brush to remove dirt trapped in the grain of the material.