GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra - 2WD 🢒 Engine 🢒 Engine Controls and Fuel - 4.8L, 5.3L, 6.0L and 6.2L 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Object Number: 1696891 Size: SH
  1. Remove the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Disconnect the engine wiring harness electrical connector (4) from the manifold absolute pressure (MAP) sensor.

    3. Object Number: 1697060 Size: SH
  3. Remove the MAP sensor retainer.
  4. Remove the MAP sensor.

Installation Procedure

Important: Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.


    Object Number: 1697060 Size: SH
  1. Install the MAP sensor.
  2. Install the MAP sensor retainer.

    3. Object Number: 1696891 Size: SH
  3. Connect the engine harness wiring electrical connector (4) to the MAP sensor.
  4. Install the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .