- Install the turbocharger exhaust pipe into the clamp and position the pipe flat against the turbocharger.
- Loosely install the turbocharger exhaust pipe to bracket bolt (1).
Notice: Refer to Fastener Notice in the Preface section.
- Position the turbocharger exhaust pipe heat shield and install the heat shield bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb ft).
- Position the transmission fluid fill tube.
- Install the transmission fluid fill tube to bellhousing nuts.
Tighten
Tighten the nuts to 18 N·m (13 lb ft).
Important: Prior to tightening the turbocharger exhaust clamp, ensure that the turbocharger exhaust pipe is inserted into the clamp.
- Tighten the turbocharger exhaust pipe to turbocharger clamp bolt (1).
Tighten
Tighten the bolt to 15 N·m (11 lb ft).
- Install the catalytic converter. Refer to
Catalytic Converter Replacement.
- Tighten the turbocharger exhaust pipe to bracket bolt.
Tighten
Tighten the bolt to 34 N·m (25 lb ft).
- Install the turbocharger upper heat shield and bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the EGR valve cooler. Refer to
Exhaust Gas Recirculation Valve Cooler Replacement.
- Install the glow plug control module and both brackets. Refer to
Glow Plug Control Module Replacement.