Callout
| Component Name
|
Preliminary Procedures
- Apply the park brake.
- Deplete the vacuum reserve in the vacuum booster by applying the brake pedal 3 times or until the pedal becomes firm.
|
1
| Brake Booster Pushrod Retainer Bolt
Notice: Refer to Fastener Notice in the Preface section.
Tighten
10 N·m (89 lb in) |
2
| Brake Booster Pushrod Retainer
|
3
| Stop Lamp Switch
|
4
| Brake Booster Pushrod
|
5
| Brake Booster Nut (Qty: 4)
Tip
Tighten the upper right vacuum brake booster nut first.
Tighten
33 N·m (24 lb ft) |
6
| Master Cylinder Nut (Qty: 2)
Tighten
33 N·m (24 lb ft) |
7
| Master Cylinder Assembly
Procedure
- Without disconnecting the brake pipe fittings, carefully position the master cylinder assembly aside and support with heavy mechanics wire or equivalent.
- Inspect the brake master cylinder to vacuum brake booster seal for damage and replace if necessary.
- Ensure the brake master cylinder to vacuum brake booster seal is properly seated in the groove of the master cylinder.
|
8
| Vacuum Brake Booster Hose Clamp
|
9
| Vacuum Brake Booster Hose
|
10
| Vacuum Brake Booster
Procedure
- Disconnect the vacuum brake booster electrical connectors, if equipped.
- Discard the vacuum brake booster gasket.
- Install a new vacuum brake booster gasket.
|
Callout
| Component Name
|
Preliminary Procedures
- Apply the park brake.
- Deplete the vacuum reserve in the vacuum booster by applying the brake pedal 3 times or until the pedal becomes firm.
|
1
| Brake Booster Pushrod Retainer Bolt
Notice: Refer to Fastener Notice in the Preface section.
Tighten
10 N·m (89 lb in) |
2
| Brake Booster Pushrod Retainer
|
3
| Stop Lamp Switch
|
4
| Brake Booster Pushrod
|
5
| Brake Booster Nut (Qty: 4)
Tip
Tighten the upper right vacuum brake booster nut first.
Tighten
33 N·m (24 lb ft) |
6
| Master Cylinder Nut (Qty: 2)
Tighten
33 N·m (24 lb ft) |
7
| Master Cylinder Assembly
Procedure
- Without disconnecting the brake pipe fittings, carefully position the master cylinder assembly aside and support with heavy mechanics wire or equivalent.
- Inspect the brake master cylinder to vacuum brake booster seal for damage and replace if necessary.
- Ensure the brake master cylinder to vacuum brake booster seal is properly seated in the groove of the master cylinder.
|
8
| Vacuum Brake Booster Hose Clamp
|
9
| Vacuum Brake Booster Hose
|
10
| Vacuum Brake Booster
Procedure
- Disconnect the vacuum brake booster electrical connectors, if equipped.
- Discard the vacuum brake booster gasket.
- Install a new vacuum brake booster gasket.
|
