For 1990-2009 cars only
Removal Procedure
- Disconnect electrical from the rear object sensor.
- Lift the locking tabs on the housing and remove the rear object sensor.
Installation Procedure
- Paint the rear object sensor. Refer to Basecoat/Clearcoat Paint Systems.
- Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gages.
- Insert the sensor into the housing.
- Connect the electrical connector to the rear object sensor.
Important: Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.
