Parking Brake Rear Cable Replacement - Right Side JD9

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the right park brake cable (1) from the intermediate cable equalizer bar (2).
5. Release the right park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit (3) rearward.



6. Release the park brake cable (1) from the rear axle housing cover clip.
7. Remove the park brake cable clip bolt (2).



8. Release the park brake cable from the rear axle bracket by compressing the locking tabs and pulling the park brake cable conduit (1) rearward.
9. Disconnect the park brake cable eye (2) from the park brake actuator lever.
10. Remove the park brake cable assembly from the vehicle.

1. Connect the right park brake cable eye (2) to the park brake actuator lever.
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward and inserting the cable conduit into the rear axle bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the rear axle bracket.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the park brake cable clip bolt (2).

Tighten
Tighten the bolt to 22 N·m (16 lb ft).

4. Connect the park brake cable (1) to the rear axle housing cover clip.



5. Connect the right rear park brake cable (1) to the intermediate cable equalizer bar (2).
6. Insert the park brake cable conduit (3) into the frame bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

7. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
8. Adjust the park brake. Refer to Park Brake Adjustment.

Parking Brake Rear Cable Replacement - Right Side JF3, JF7

Tools Required

J 37043 Park Brake Cable Release Tool

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the right park brake cable (1) from the intermediate cable equalizer bar (2).
5. Release the right park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit (3) rearward.



6. Release the park brake cable (1) from the rear axle housing cover clip.
7. Remove the park brake cable clip bolt (2).
8. Remove the park brake cable from the cable guides.
9. Remove the brake shoes. Refer to Brake Shoe Replacement.



10. Using the J 37043  (1), remove the park brake cable from the backing plate.



11. Remove the park brake cable from the vehicle.

1. Install the park brake cable to the vehicle.
2. Install the brake shoes. Refer to Brake Shoe Replacement.

Ensure the locking tabs on the cable conduit are fully engaged into the rear axle bracket.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the park brake cable clip bolt (2).

Tighten
Tighten the bolt to 22 N·m (16 lb ft).

4. Connect the park brake cable (1) to the rear axle housing cover clip.
5. Install the park brake cable to the cable guides.



6. Connect the right rear park brake cable (1) to the intermediate cable equalizer bar (2).
7. Insert the park brake cable conduit (3) into the frame bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

8. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
9. Adjust the park brake. Refer to Park Brake Adjustment.

Parking Brake Rear Cable Replacement - Right Side JH6, JH7

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Disconnect the right park brake cable from the equalizer (1).
5. Release the right park brake cable from the frame bracket by compressing the locking tabs on the cable conduit (2) and pulling the cable rearward.



6. Release the park brake cable (1) from the rear axle housing cover clip.
7. Remove the park brake cable clip bolt (2).



8. Disconnect the park brake cable eye (3) from the park brake actuator lever (2).
9. Remove the park brake cable from the bracket by pulling the cable conduit (1) rearward to compress the spring and sliding the cable conduit out of the bracket.
10. Remove the park brake cable assembly from the vehicle.

1. Connect the right park brake cable eye (3) to the park brake actuator lever (2).
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward to compress the spring and inserting the cable conduit into the rear axle bracket.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the park brake cable clip bolt (2).

Tighten
Tighten the bolt to 22 N·m (16 lb ft).

4. Connect the park brake cable (1) to the rear axle housing cover clip.



5. Insert the park brake cable conduit (2) into the frame bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

6. Connect the right rear park brake cable to the equalizer (1).
7. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
8. Adjust the park brake. Refer to Park Brake Adjustment .