Tools Required
J 29714-A
Servo Cover Depressor
- Install the 2-4 servo into the case.
- Install oil pan with only four bolts to align pan to case.
- Use the
J 29714-A
in order to compress the servo cover.
- Install the servo cover retaining ring.
- Remove oil pan.
- Pour solvent into the accumulator bore until the channel is filled. Watch for leaks in the case channel.
Important: It is normal to see leakage from the small hole next to the larger oval hole.
- If leakage from the oval shaped hole is observed, replace the third accumulator retainer and ball assembly.