Rear Door Opening Weatherstrip Replacement Crew Cab

1. Remove the rear door sill plate. Refer to Rear Side Door Sill Plate Replacement .



2. Remove the weatherstrip from the pinch-weld flange.

1. Align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side.
2. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
3. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
4. Install the rear door sill plate. Refer to Rear Side Door Sill Plate Replacement .