GM Service Manual Online
For 1990-2009 cars only

Front Center Seat Back Cushion Latch Upper Cover Replacement AZ3


Object Number: 1829300  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the front center seat. Refer to Front Center Seat Replacement .

1

Front Seat Armrest Hinge Finish Cover Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Seat Armrest Hinge Finish Cover (Qty: 2)

3

Front Center Seat Back Cushion Latch Upper Cover

Front Center Seat Back Cushion Latch Upper Cover Replacement AE7


Object Number: 1990110  Size: MF

Callout

Component Name

Caution: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Preliminary Procedure

Remove the front center seat. Refer to Front Center Seat Replacement .

1

Front Center Seat Storage Compartment Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Front Center Seat Back Cushion Latch Lower Cover

3

Front Center Seat Back Cushion Latch Upper Cover

Tip
Slide the upper cover out of the lower cover.