Callout | Component Name |
---|---|
Preliminary Procedure
| |
1 | Front Center Seat Back Cushion Latch Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten |
2 | Front Center Seat Back Cushion Latch |
Callout | Component Name |
---|---|
Caution: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. Preliminary ProcedureRemove the front center seat. Refer to Front Center Seat Replacement . | |
1 | Front Center Seat Storage Compartment Bolt Notice: Refer to Fastener Notice in the Preface section. Tighten |
2 | Front Center Seat Back Cushion Finish Cover |
3 | Front Center Seat Storage Compartment Bolt Tighten |
4 | Front Center Seat Back Cushion Latch Lower Cover |
5 | Front Center Seat Back Cushion Latch Upper Cover Tip |
6 | Front Center Seat Armrest Bolt (Qty: 2) Tighten |
7 | Front Center Seat Armrest |
8 | Front Center Seat Armrest Bolt (Qty: 2) Tighten |
9 | Front Center Seat Back Cushion Latch |