Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement
.
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screw driver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Remove the upper HVAC module case (3) from the lower HVAC module case (10).
- Remove the air temperature separator plate (5) from the lower HVAC module case (10).
- Remove the left temperature door (11) from the lower HVAC module case (10).
Installation Procedure
- Install the left temperature door (11) to the lower HVAC module case (10).
- Install the air temperature separator plate (5) to the lower HVAC module case (10).
- Install the upper HVAC module case (3) to the lower HVAC module case (10).
Notice: Refer to Fastener Notice in the Preface section.
Important: For every heat stake removed ensure that you install a screw.
- Install the screws to the HVAC module assembly.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement
.