GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Sierra - 2WD 🢒 Engine 🢒 Engine Mechanical - 4.3L 🢒 Oil Filter Adapter Replacement

Removal Procedure

    Object Number: 188048 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the oil pan drain plug and drain the oil into a suitable container.

    3. Object Number: 783725 Size: SH
  3. Remove the oil filter.
  4. Remove the oil filter adapter.

Installation Procedure

    Object Number: 188048 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the oil pan drain plug into the drain pan.

    2. Tighten
    Tighten the plug to 25 N·m (18 lb ft).


    Object Number: 783725 Size: SH
  2. Install the oil filter adapter.

    3. Tighten
    Tighten the adapter to 55 N·m (41 lb ft).

  3. Install the oil filter.

    4. Tighten
    Tighten the filter to 30 N·m (22 lb ft).

  4. Lower the vehicle.
  5. Fill the engine with the proper quantity and quality of engine oil. Refer to Approximate Fluid Capacities .