- Install the NEW exhaust manifold gaskets.
- Install the exhaust manifold.
- Install the spark plug wire shields.
- If reusing the fasteners, apply threadlock GM P/N 12345493 (Canadian P/N 10953488) or equivalent, to the threads of the exhaust manifold bolts and stud.
Notice: Refer to Fastener Notice in the Preface section.
- Install the exhaust manifold bolts and stud.
Tighten
- Tighten the exhaust manifold bolts and stud on the first pass to 15 N·m (11 lb ft).
- Tighten the exhaust manifold bolts and stud on the final pass to 30 N·m (22 lb ft).
- Install the spark plug wires to the spark plug wire retainers.
- Install the spark plug wires onto the spark plugs.