GM Service Manual Online
For 1990-2009 cars only

Rear License Plate Lamp Replacement Silverado

Removal Procedure


    Object Number: 348708  Size: SH
  1. Ensure the headlamp switch is in the OFF position.
  2. Reach under the rear bumper and press on the lens end of the cover in order to release the locking tab.
  3. Remove the lens housing from the bumper assembly.
  4. Remove the bulb.

Installation Procedure


    Object Number: 348708  Size: SH
  1. Install the bulb.
  2. Install the rear edge of the lens housing into the rear bumper.
  3. Push on the lens side of the housing in order to snap the housing into the rear bumper assembly.
  4. Inspect the operation.

Rear License Plate Lamp Replacement VF7


Object Number: 1739475  Size: SF

Callout

Component Name

1

License Plate Lamp Electrical Connector

Tip
Disconnect the electrical connector from the rear junction block.

2

Rear License Plate Lamp Assembly