Parking Brake Rear Cable Replacement - Left Side JD9

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the left park brake cable (1) from the intermediate cable equalizer bar (2).
5. Release the left park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit (3) rearward.



6. Remove the park brake cable clip bolt.



7. Release the park brake cable from the rear axle bracket by compressing the locking tabs and pulling the park brake cable conduit (1) rearward.
8. Disconnect the park brake cable eye (2) from the park brake actuator lever.
9. Remove the park brake cable assembly from the vehicle.

1. Connect the left park brake cable eye (2) to the park brake actuator lever.
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward and inserting the cable conduit into the rear axle bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the rear axle bracket.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the park brake cable clip bolt.

Tighten
Tighten the bolt to 22 N·m (16 lb ft).




4. Connect the left rear park brake cable (1) to the intermediate cable equalizer bar (2).
5. Insert the park brake cable conduit (3) into the frame bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
7. Adjust the park brake. Refer to Park Brake Adjustment.

Parking Brake Rear Cable Replacement - Left Side JF3, JF7

Tools Required

J 37043 Park Brake Cable Release Tool

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the left park brake cable (1) from the intermediate cable equalizer bar (2).
5. Release the left park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit (3) rearward.
6. Remove the park brake cable from the cable guides.



7. Remove the brake shoes. Refer to Brake Shoe Replacement.
8. Using the J 37043  (1), remove the park brake cable from the backing plate.



9. Remove the park brake cable assembly from the vehicle.

1. Install the park brake cable assembly into the backing plate.
2. Install the brake shoes. Refer to Brake Shoe Replacement.
3. Install the park brake cable to the cable guides.



4. Connect the left rear park brake cable (1) to the intermediate cable equalizer bar (2).
5. Insert the park brake cable conduit (3) into the frame bracket.

Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.

6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
7. Adjust the park brake. Refer to Park Brake Adjustment.