Tools Required

1. Inspect the reverse input clutch housing and drum assembly for the following conditions:

•	Damaged or worn bushings

•	Surface finish on the hub and outer housing - check band surface for flatness

•	Leak at the weld

•	Heat distortion

•	Rolled or distorted retaining ring groove




2. Using the J 25019-16 with the J 7004-A , remove the reverse input clutch front bushing (603).



3. Using the J 25019-4 with the J 8092 , remove the reverse input clutch rear bushing (606).

1. Using the J 25019-9 with the J 8092 , install a reverse input clutch front bushing (603).



2. Using the J 34196-3 which is part of kit J 34196-B with the J 8092 , install a reverse input clutch rear bushing (606).