Callout
Component Name
1
Hood Rear Molding Screw (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tighten: 1.5 N·m (13 lb in)
2
Hood Rear Molding Assembly Nut (Qty: 2)
3
Hood Rear Molding Integral Clip (Qty: 4)
TipEnsure all four clips are fully seated prior to installing the hood rear molding screws.
4
Hood Rear Molding
TipGently pry the hood molding upward, in order to remove.