Table 1: | Driver Door Switch Scan Tool Data Parameters |
Table 2: | Driver Door Switch Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays volts. This is the voltage input supplied to the driver door switch. |
Door Key Cyl. Unlock Switch | -- | Idle | The scan tool displays Idle or Unlock. This is the state of the driver door key cylinder unlock switch. |
Door Lock Actuator Cmd. | -- | Off | The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator. |
Driver Door Ajar Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door ajar switch. |
Driver Door Open Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door open switch. |
Driver LF Window Switch | -- | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
Driver LR Window Switch | -- | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left rear window switch. |
Driver RF Window Switch | -- | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right front window switch. |
Driver RR Window Switch | -- | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right rear window switch. |
Memory Recall Switches | -- | Varies | This displays volts. This is the voltage input supplied to the driver door memory recall switches. |
Memory Switch 12V Ref. | -- | Varies | This displays volts. This is the voltage input supplied to the driver door memory switch. |
Memory Switch Backlight | -- | Varies | The scan tool displays %. This is the intensity of the backlighting in the memory switch. |
Mirror 5 Volt Reference | -- | ON | The scan tool displays On or Off. This is the state of the voltage reference circuit to the mirror. |
Mirror Fold Switch | -- | Idle | The scan tool displays Idle, Extend or Retract. This is the state of the mirror fold switch. |
Mirror Motor | -- | Idle | The scan tool displays Idle, Invalid, Up, Down, Left and Right. This is the state of the mirror motor. |
Mirror Horizontal Position | -- | Varies | This displays volts. This is the voltage input supplied to the mirror horizontal position. |
Mirror Select Switch | -- | Idle | The scan tool displays Idle, Right or Left. This is the state of the mirror select switch. |
Mirror Vertical Position | -- | Varies | This displays volts. This is the voltage input supplied to the mirror vertical position. |
Rear Window Sw. 12V Ref. | -- | Varies | This displays volts. This is the voltage input supplied to the rear window switch. |
Seat Back Heat Mode Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat back heat mode indicator. |
Seat Back Heat Mode Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch. |
Seat Cool Mode Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat cool mode indicator. |
Seat Cool Mode Switch | -- | Off | The scan tool displays On or Off. This is the state of the seat cool mode switch. |
Seat Heat High Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat high indicator. |
Seat Heat Medium Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat medium indicator. |
Seat Heat Low Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat low indicator. |
Seat Heat Mode Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat mode. |
Seat Heat Mode Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the seat heat mode switch. |
VIN Learned | -- | Yes | The scan tool displays Yes or No. This is the state of the driver door switch VIN programming. |
Window Lockout Switch | -- | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch. |
Window Lockout Switch Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch indicator. |
Window Switch Backlight | -- | Varies | The scan tool displays %. This is the intensity of the backlighting in the window switch. |
Scan Tool Output Control | Description |
---|---|
Door Deadbolt Lock/Unlock | This command will lock and unlock the driver door dead bolt actuator. |
Door Lock/Unlock | This command will lock and unlock the driver door lock actuator. |
Front Window Motor | This test will command the front window both up and down. |
Heated Seat Indicators | This will command the heated seat indicators ON and OFF. |
Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the integrated switches backlighting. |
Mirror Fold | This will command the driver mirror to fold and unfold. |
Mirror Heater | This will command the driver mirror heater ON and OFF. |
Mirror Left/Right | This will command the driver mirror left and right. |
Mirror Up/Down | This will command the driver mirror up and down. |
Non-Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the non-integrated switches backlighting. |
Power Window Motor Programming | This will enable the driver power window motor to be programmed. |
Puddle/Courtesy Lamp | This will command the courtesy lamps ON and OFF. |
Window Lockout Indicator | This will command the window lockout indicator ON and OFF. |
Table 1: | Passenger Door Switch Scan Tool Data Parameters |
Table 2: | Passenger Door Switch Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays volts. This is the voltage input supplied to the passenger door switch. |
Door Key Cyl. Unlock Switch | -- | Idle | The scan tool displays Idle or Unlock. This is the state of the passenger door key cylinder unlock switch. |
Door Lock Actuator Cmd. | -- | Off | The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator. |
Memory Switch 12V Ref. | -- | Varies | This displays volts. This is the voltage input supplied to the passenger door memory switch. |
Memory Switch Backlight | -- | Varies | The scan tool displays %. This is the intensity of the backlighting in the memory switch. |
Mirror 5-Volt Reference | -- | ON | The scan tool displays On or Off. This is the state of the voltage reference circuit to the mirror. |
Mirror Horizontal Position | -- | Varies | This displays volts. This is the voltage input supplied to the mirror horizontal position. |
Mirror Vertical Position | -- | Varies | This displays volts. This is the voltage input supplied to the mirror vertical position. |
Passenger Door Ajar Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger door ajar switch. |
Passenger Door Open Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger door open switch. |
Passenger Window Switch | -- | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
Rear Window Sw. 12V Ref. | -- | Varies | This displays volts. This is the voltage input supplied to the rear window switch. |
Seat Back Heat Mode Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat back heat mode indicator. |
Seat Back Heat Mode Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch. |
Seat Cool Mode Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat cool mode indicator. |
Seat Cool Mode Switch | -- | Off | The scan tool displays On or Off. This is the state of the seat cool mode switch. |
Seat Heat High Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat high indicator. |
Seat Heat Medium Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat medium indicator. |
Seat Heat Low Ind. Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat low indicator. |
Seat Heat Mode Cmd. | -- | Off | The scan tool displays On or Off. This is the state of the seat heat mode. |
Seat Heat Mode Sw. | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the seat heat mode switch. |
VIN Learned | -- | Yes | The scan tool displays Yes or No. This is the state of the passenger door switch VIN programming. |
Window Switch Backlight | -- | Varies | The scan tool displays %. This is the intensity of the backlighting in the window switch. |
Scan Tool Output Control | Description |
---|---|
Door Deadbolt Lock/Unlock | This command will lock and unlock the passenger door dead bolt actuator. |
Door Lock/Unlock | This command will lock and unlock the passenger door lock actuator. |
Front Window Motor | This test will command the front window both Up and Down. |
Heated Seat Indicators | This will command the heated seat indicators ON and OFF. |
Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the integrated switches backlighting. |
Mirror Fold | This will command the passenger mirror to fold and unfold. |
Mirror Heater | This will command the passenger mirror heater ON and OFF. |
Mirror Left/Right | This will command the passenger mirror left and right. |
Mirror Up/Down | This will command the passenger mirror up and down. |
Non-Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the non-integrated switches backlighting. |
Power Window Motor Programming | This will enable the driver power window motor to be programmed. |
Puddle/Courtesy Lamp | This will command the courtesy lamps ON and OFF. |