Callout
| Component Name
|
Caution: Refer to SIR Caution in the Preface section.
Preliminary Procedure
- Remove the front seat. Refer to
Front Seat Replacement - Bucket
.
- Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to
Passenger Presence System Rezeroing
.
|
1
| Front Seat Recliner Lever (If Equipped)
Tip Using a flat-bladed tool, push the retainer clip downward and pull outward to release the knob. |
2
| Front Seat Adjuster Outer Finish Cover
Refer to
Front Seat Cushion Outer Trim Panel Replacement
.
|
3
| Front Seat Adjuster Inner Finish Cover
Refer to
Front Seat Cushion Inner Trim Panel Replacement
.
|
4
| Front Seat Cushion Cover and Pad
Tip
- Disengage the j-channel retainers from the seat cushion frame.
- Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
|
5
| Inflatable Restraint Front Passenger Presence Sensor Retainer (Qty: 2)
|
6
| Inflatable Restraint Front Passenger Presence Sensor
Tip
- Lay the seat on it's side.
- Unhook connector from retainer on seat frame and push up through seat pan.
- Disconnect and remove sensor.
|
7
| Front Seat Adjuster Assembly
Refer to
Front Seat Adjuster Replacement
or
Front Seat Adjuster Replacement
.
|
8
| Inflatable Restraint Front Passenger Presence Module Rivets (Qty: 2)
Tip Drill out the rivets to remove and install using new rivets. |
9
| Inflatable Restraint Front Passenger Presence Module
|