Turbocharger Coolant Hoses/Pipes Replacement LMM- Inlet Pipe

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
2. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .
3. Drain the cooling system. Refer to Cooling System Draining and Filling .

Important: After removing the charged air cooler duct, cover the turbocharger opening with tape in order to prevent entry of objects.

4. Remove the charged air cooler outlet pipe from the turbocharger and the charged air cooler. Refer to Charge Air Cooler Outlet Pipe Replacement .



5. Reposition the turbocharger coolant inlet hose clamp at the bypass valve.



6. Remove the turbocharger coolant inlet hose banjo bolt (1).
7. Remove the inlet hose washer and inlet line.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the inlet hose washer and inlet line.
2. Install the turbocharger coolant inlet hose banjo bolt (1).

Tighten
Tighten the bolt to 25 N·m (18 lb ft).




3. Position the turbocharger coolant inlet hose clamp at the bypass valve.
4. Remove the tape from the turbocharger openings.

Important: Lubricate the end of the duct prior to installation.

5. Install the charged air cooler outlet pipe to the turbocharger and the charged air cooler. Refer to Charge Air Cooler Outlet Pipe Replacement .
6. Install the air cleaner. Refer to Air Cleaner Assembly Replacement .
7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
8. Fill the cooling system. Refer to Cooling System Draining and Filling .

Turbocharger Coolant Hoses/Pipes Replacement LMM- Outlet Pipe

1. Remove the turbocharger coolant inlet pipe. Refer to Turbocharger Coolant Hoses/Pipes Replacement .
2. Remove the generator mounting bracket. Refer to Generator Bracket Replacement .
3. Remove the exhaust gas recirculation (EGR) cooler assembly. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
4. Remove the cooling fan clutch. Refer to Fan Clutch Replacement .



5. Reposition the hose clamp at the bypass pipe.
6. Remove the turbocharger coolant outlet hose from the bypass pipe.



7. Reposition the turbocharger coolant outlet hose clamp.
8. Remove the turbocharger coolant outlet hose from the pipe on the turbocharger.



9. Remove the turbocharger coolant outlet pipe bolt and nut.



10. If necessary, remove the turbocharger. Refer to Turbocharger Replacement .
11. If necessary, remove the coolant outlet pipe clip bolt (3) from the turbocharger.
12. If necessary, remove the coolant outlet pipe.

1. If necessary, install the coolant outlet pipe.

Notice: Refer to Fastener Notice in the Preface section.

2. If necessary, install the coolant outlet pipe clip bolt (3) to the turbocharger.

Tighten
Tighten the bolt to 9 N·m (80 lb in).

3. If necessary, install the turbocharger. Refer to Turbocharger Replacement .



4. Install the turbocharger coolant outlet pipe bolt and nut.

Tighten
Tighten the bolt/nut to 9 N·m (80 lb in).




5. Install the turbocharger coolant outlet hose to the pipe on the turbocharger.
6. Position the turbocharger coolant outlet hose clamp.



7. Install the turbocharger coolant outlet hose to the bypass pipe.
8. Position the hose clamp at the bypass pipe.
9. Install the cooling fan clutch. Refer to Fan Clutch Replacement .
10. Install the EGR cooler assembly. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
11. Install the generator mounting bracket. Refer to Generator Bracket Replacement .
12. Install the turbocharger coolant inlet pipe. Refer to Turbocharger Coolant Hoses/Pipes Replacement .