Preliminary Procedure

1. Open the hood.
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
3. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .
4. Place a clean suitable container under the vehicle prior to disconnecting the washer hose.
5. Disconnect the washer hose from the washer pump spout.

1

Windshield Washer Hose Retainer Clip

2

Windshield Washer Nozzle Hose

Tip
Disconnect the hose at the left rear fender flange.

3

Windshield Washer Pump Hose Assembly

Tip
Route the new hose in the same location as the old hose was removed from.