For 1990-2009 cars only
- Remove 18 bolts (1), one bolt (2), and one bolt (3).
- Attach a sling to the converter housing (1).
- Attach a hoist to the sling.
- Remove the converter housing/oil pump cover assembly (1) from the transmission case (4) and the turbine shaft (2).
- Place the converter housing/oil pump cover assembly on the work table.
- Remove the sling.
- Remove and discard the main housing/separator plate gasket (3).
Caution: Refer to Torque Converter Housing/Low and Reverse Clutch Housing Bolt Size Caution in the Preface section.
Warning: The torque converter housing/oil pump cover assembly dry weights are approximately 27 kg (60 lb). To help avoid personal injury and/or property damage:
• Use caution when installing, removing, or moving the converter housing/oil pump cover assembly. • Get help when lifting the converter housing/oil pump cover assembly. • Assistance from a hoist or another person may be required. • Make sure lifting equipment can properly support the converter housing/oil pump cover assembly.
