- Install the transmission internal oil filter seal (6) onto the transmission internal oil filter (5).
- Align the neck of the transmission internal oil filter (5) with the filter hole in the transmission case.
- Install the transmission internal oil filter (5).
- Make sure the filter is seated.
- Install a new oil pan gasket (4) onto the transmission case.
- Install the oil pan (3) onto the transmission case.
Caution: Refer to Fastener Caution in the Preface section.
- Install 12 oil pan bolts (7) and tighten the bolts to
27 N·m (20 lb ft).
- Install the drain plug seal (2) onto the drain plug (1).
Caution: Refer to Component Fastener Tightening Caution in the Preface section.
- Install the drain plug (1) and tighten the plug to
35 N·m (26 lb ft).