GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1997 🢒 Sonoma Pickup - 2WD 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Exhaust Gas Recirculation Valve Replacement

Removal Procedure

    Object Number: 10912 Size: SH
  1. Remove the EGR electrical connector.

    2. Object Number: 10914 Size: SH
  2. Remove the EGR valve flange bolts.

    3. Object Number: 10913 Size: SH
  3. Remove the EGR valve and the gasket.

Installation Procedure

    Object Number: 10913 Size: SH
  1. With a new gasket, install the EGR valve.

    2. Object Number: 10914 Size: SH
  2. Install the EGR valve and the flange attaching bolts.

    3. Tighten
    Tighten the EGR valve flange attaching bolts to 2.4 N·m (17 lb ft)

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 10912 Size: SH
  3. Install the electrical connectors.