GM Service Manual Online
For 1990-2009 cars only

Rear Seat Belt Replacement Two Door Utility

Removal Procedure

Caution: Refer to Seat Belt Replacement Caution in the Preface section.

Notice: Refer to Servicing and Replacing Seat Belts Notice in the Preface section.

The seat belt alarm is located in the Truck Body Control Module, which is located behind the center instrument panel sound insulator.


    Object Number: 68054  Size: SH
  1. Remove the rear seat assembly. Refer to Rear Seat Replacement in Seats.
  2. Remove the lower seat belt anchor plate from the rear seat bolt.

  3. Object Number: 7028  Size: SH
  4. Remove the upper seat belt anchor bolt cover.

  5. Object Number: 7031  Size: SH
  6. Remove the bolt that retains the upper seat belt anchor plate.
  7. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.
  8. Guide the seat belt through the opening in the body side trim panel.

  9. Object Number: 68056  Size: SH
  10. Remove the bolt that retains the seat belt retractor assembly to the vehicle.
  11. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure


    Object Number: 68056  Size: SH
  1. Install the seat belt retractor assembly to the vehicle.
  2. Install the bolt that retains the rear seat belt retractor assembly to the vehicle.
  3. Tighten
    Tighten the seat belt retractor assembly bolt to 70 N·m (52 lb ft).

  4. Guide the seat belt through the opening in the body side trim panel.
  5. Install the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.

  6. Object Number: 7031  Size: SH
  7. Install the upper seat belt anchor plate and bolt to the vehicle.
  8. Tighten
    Tighten the upper seat belt anchor plate bolt to 70 N·m (52 lb ft).


    Object Number: 7028  Size: SH
  9. Install the upper seat belt anchor bolt cover.

  10. Object Number: 68054  Size: SH
  11. Install the lower seat belt anchor plate to the rear seat bolt.
  12. Install the rear seat assembly. Refer to Rear Seat Replacement in Seats.

Rear Seat Belt Replacement Four Door Utility

Removal Procedure

Caution: Refer to Seat Belt Replacement Caution in the Preface section.

Notice: Refer to Servicing and Replacing Seat Belts Notice in the Preface section.

The seat belt alarm is located in the Truck Body Control Module, which is located behind the center instrument panel sound insulator.


    Object Number: 68058  Size: SH
  1. Remove the bolt that retains the lower seat belt anchor plate to the vehicle.

  2. Object Number: 7692  Size: SH
  3. Carefully pry open the upper seat belt anchor plate cover with a flat-bladed tool.

  4. Object Number: 68053  Size: SH
  5. Remove the bolt that retains the upper seat belt anchor plate to the vehicle.
  6. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.
  7. Guide the seat belt through the opening in the body side trim panel.

  8. Object Number: 68057  Size: SH
  9. Remove the bolt that retains the seat belt retractor assembly to the vehicle.
  10. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure


    Object Number: 68057  Size: SH
  1. Install the seat belt retractor assembly to the vehicle.
  2. Install the bolt that retains the seat belt retractor assembly to the vehicle.
  3. Tighten
    Tighten the seat belt retractor assembly bolt to 70 N·m (52 lb ft).

  4. Guide the seat belt through the opening in the body side trim panel.
  5. Install the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.

  6. Object Number: 68053  Size: SH
  7. Install the upper seat belt anchor plate and bolt to the vehicle.
  8. Tighten
    Tighten the upper seat belt anchor plate bolt to 70 N·m (52 lb ft).

  9. Close the upper seat belt anchor plate cover.

  10. Object Number: 68058  Size: SH
  11. Install the lower seat belt anchor plate and bolt to the vehicle.
  12. Tighten
    Tighten the lower seat belt anchor plate bolt to 70 N·m (52 lb ft).

Rear Seat Belt Replacement Child Comfort Guide

Removal Procedure

The child comfort guide is used only in utility vehicles. The guides are located on the body side trim panels, next to the outboard rear seats.

  1. Remove the retainer that secures the child comfort guide to the body side trim panel by using a flat-bladed tool.
  2. Remove the child comfort guide from the body side trim panel.

Installation Procedure

  1. Install the child comfort guide to the body side trim panel.
  2. Install the retainer that secures the child comfort guide to the body side trim panel.