GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Sonoma Pickup - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamps Inoperative - Left Low Beam

Step

Action

Value(s)

Yes

No

1

Did you perform the Headlight System Check?

--

Go to Step 2

Go to Headlight System Check

2

Use the scan tool in order to read the Body Control Module (BCM) current trouble codes.

Is DTC B2575, B2577, B2600 set as a current code?

--

Go to Diagnostic System Check - Body Control System in Body Control System

Go to Step 3

3
  1. Disconnect the inoperative headlamp connector.
  2. Turn the headlamp switch to the HEAD position.
  3. Place the multifunction switch in the LOW BEAM position.
  4. Connect a test lamp from the headlamp connector terminal A to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 4

4

Locate and repair an open in CKT 712 (YEL) between the following components:

    • The headlamp low beam bulb
    • The underhood bussed electrical center (UBEC)

Is the repair complete?

--

Go to Headlight System Check

--

5

Connect a test lamp from the headlamp connector terminal A to terminal B.

Does the test lamp light?

--

Go to Step 7

Go to Step 6

6

Locate and repair an open in CKT 525 (YEL) between the following components:

    • The inoperative headlamp
    • The UBEC

Is the repair complete?

--

Go to Headlight System Check

--

7

Replace the headlamp.

Is the repair complete?

--

Go to Headlight System Check

--