Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Power Windows
System Check?
| --
| Go to
Step 2
| Go to
Power Windows System Check
|
2
|
- Access the left door lock and side window switch.
- Turn the ignition switch to the RUN position.
- Connect a J 39200
digital multimeter (DMM) to ground and CKT 1001 (DK GRN), terminal L
at the left door lock and side window switch connector C1.
- Ensure that the connector C1 remains connected.
- Test for voltage.
Is ignition voltage present?
| IGN+
| Go to
Step 4
| Go to
Step 3
|
3
| Repair the open or high resistance in CKT 1001 (DK GRN) between
the power window circuit breaker and the left door lock and side window switch.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
4
|
- Turn the ignition switch to the RUN position.
- Connect a J 39200
DMM to CKT 1001 (DK GRN), terminal L at the left door
lock and side window switch connector C1 and CKT 1850 (BLK),
terminal C at the left door lock and side window switch connector C2.
- Test for voltage.
Is ignition voltage present?
| IGN+
| Go to
Step 6
| Go to
Step 5
|
5
| Repair the open or high resistance in CKT 1850 (BLK) between
the left door lock and side window switch connector C2 and G202.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
6
|
- Turn the ignition switch to the RUN position.
- Connect a J 39200
DMM to CKT 164 (BLU), terminal A and CKT 165
(BRN), terminal E at the left door lock and side window switch connector C2.
- Ensure that the connector C2 remains connected.
- Operate the left side window regulator switch in the UP/DOWN position.
- Test for voltage.
Is ignition voltage present?
| IGN+
| Go to
Step 7
| Go to
Step 8
|
7
| Perform the Power Windows System Check for each window in order to repair
the open or high resistance in four window circuits.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
8
| Replace the left door and side window switch.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
