Did you perform the Power Seats System Check?

--

Go to Step 2

Go to Power Seats System Check

1. Ensure that the seat lateral motor electrical connector is connected.
2. Using a J 39200 digital multimeter (DMM), backprobe the seat lateral motor connector terminal A (CKT 285) to ground.
3. Operate the power seat adjuster switch to the FORWARD position.

Is voltage present?

--

Go to Step 3

Go to Step 5

1. Ensure that the seat lateral motor electrical connector remains disconnected.
2. Using the J 39200 DMM, backprobe the seat lateral motor connector terminal B (CKT 284) to ground.
3. Operate the power seat adjuster switch to the REARWARD position.

Is voltage present?

--

Go to Step 4

Go to Step 6

Replace the seat lateral motor.

Is the repair complete?

--

Go to Power Seats System Check

--

1. Access the driver side power seat adjuster switch.
2. Using the J 39200 DMM, backprobe the terminal connected to CKT 282 (TAN) to ground.
3. Operate the power seat adjuster switch to the FORWARD position.

Is voltage present?

--

Go to Step 7

Go to Step 9

1. Access the driver side power seat adjuster switch.
2. Using the J 39200 DMM, backprobe the terminal connected to CKT 284 (LT GRN) to ground.
3. Operate the power seat adjuster switch to the REARWARD position.

Is voltage present?

--

Go to Step 8

Go to Step 9

Locate and repair the open or high resistance in CKT 285 between the power seat adjuster switch and the seat lateral motor.

Is the repair complete?

--

Go to Power Seats System Check

--

Locate and repair the open or high resistance in CKT 284 between the power seat adjuster switch and the seat lateral motor.

Is the repair complete?

--

Go to Power Seats System Check

--

Replace the power seat adjuster switch. Refer to Power Seat Switch Replacement .

Is the repair complete?

--

Go to Power Seats System Check

--