Removal Procedure
- Remove the vehicle control module (VCM), if equipped. Refer to
VCM Replacement/Programming
in
Engine Controls-4.3L.
- Disconnect the hose from
the coolant recovery reservoir.
- Remove the coolant recovery reservoir attaching nuts.
- Remove the coolant recovery reservoir.
- Remove the coolant from the reservoir.
Installation Procedure
- Install the coolant recovery reservoir.
- Install the coolant recovery reservoir attaching nuts.
- Connect the hose to the
coolant recovery reservoir.
- Install the vehicle control module (VCM), if equipped. Refer to
VCM Replacement/Programming
in
Engine Controls-4.3L.