For 1990-2009 cars only
Removal Procedure
- Remove the air dryer from the automatic level control air compressor. Refer to Automatic Level Control Air Dryer Replacement .
- Remove the wiring terminals B and C (1) from the automatic level control air compressor electrical connector.
- Remove the automatic level control air compressor head retaining bolts.
- Remove the automatic level control air compressor head (2) from the compressor.
- Remove the O-ring (3) from the automatic level control air compressor.
- Remove the automatic level control air compressor head wires from the conduit and the tie straps.
Installation Procedure
- Route the automatic level control air compressor head wires through the tie strap and the conduit.
- Install the O-ring (3) to the automatic level control air compressor.
- Install the automatic level control air compressor head (2) to the compressor.
- Install the automatic level control air compressor head retaining bolts.
- Install the wiring to the B and the C (1) terminals on the automatic level control air compressor electrical connector.
- Install the air dryer to the automatic level control air compressor. Refer to Automatic Level Control Air Dryer Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the automatic level control air compressor head bolts to 6 N·m
(53 lb in).
