For 1990-2009 cars only
Removal Procedure
- Raise the vehicle.
- Disconnect the vent solenoid electrical connector.
- Disconnect the vacuum hose.
- Bend back the tang on the bracket.
- Remove the vent solenoid.
Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
Installation Procedure
- Slide the vent solenoid onto the bracket.
- Connect the vacuum hose.
- Install the electrical connector.
- Lower the vehicle.
