Removal Procedure
- Remove the air cleaner outlet resonator mounting screw (1).
- Disconnect the air cleaner outlet resonator clamp at the throttle body.
- Remove the air cleaner outlet duct from the air cleaner outlet resonator.
- Disconnect the vacuum brake booster hose at the throttle body.
- Disconnect the crankcase vent hose clamp and the crankcase vent hose from the top of the engine.
- Remove the air cleaner outlet resonator (2).
Installation Procedure
- Connect the crankcase vent hose and crankcase vent hose clamp to the top of the engine.
- Install the air cleaner outlet resonator (2) to the throttle body.
- Install the air cleaner outlet resonator mounting screw (1).
- Install the air cleaner outlet duct to the air cleaner outlet resonator and the air cleaner assembly.
- Connect the vacuum brake booster hose at the throttle body.
Important: Ensure that the air cleaner outlet resonator seals to the throttle body.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
| • | Tighten the air cleaner outlet resonator mounting screw to 10 N·m (89 lb in). |
| • | Tighten the air cleaner outlet resonator clamp to 5 N·m (44 lb in). |
Tighten
Tighten the air cleaner outlet duct clamps to 5 N·m (44 lb in).
