GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

1

Did you perform the Engine Electrical Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Engine Electrical

2

  1. Turn ON the ignition, with the engine OFF.
  2. Observe the Charge indicator on the instrument panel cluster (IPC).

Does the charge indicator illuminate?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

3

  1. Turn OFF the ignition.
  2. Disconnect the generator connector.
  3. Turn ON the ignition, with the engine OFF.

Does the charge indicator remain illuminated?

Go to Step 4

Go to Step 5

4

Test the charge indicator control circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 6

5

Replace the generator. Refer to Generator Replacement .

Did you complete the replacement?

Go to Step 7

--

6

Important: Perform the set up procedure for the PCM.

Replace the PCM. Refer to Powertrain Control Module Replacement in Engine Controls-2.2L or Powertrain Control Module Replacement in Engine Controls-4.3L.

Did you complete the replacement?

Go to Step 7

--

7

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3