GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Sonoma Pickup - 2WD 🢒 Engine 🢒 Engine Mechanical - 2.2L 🢒 Camshaft Position Sensor Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Raise the vehicle.
  2. Remove the right tire assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

    3. Object Number: 10815 Size: SH
  3. Disconnect the camshaft position (CMP) sensor electrical connector.

    4. Object Number: 10816 Size: SH
  4. Remove the CMP sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 10816 Size: SH
  1. Install the camshaft position (CMP) sensor.

    2. Tighten
    Tighten the CMP sensor bolt to 10 N·m (89 lb in).


    Object Number: 10815 Size: SH
  2. Connect the CMP sensor electrical connector.
  3. Install the right tire assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.