Removal Procedure
- Relieve the fuel pressure. Refer to
Fuel Pressure Relief
.
- Raise vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the fuel filter
quick-connect fittings. Refer to
Plastic Collar Quick Connect Fitting Service
.
- Remove the clamp bolt.
- Remove the filter and the clamp from the fuel pipes.
- Remove the clamp from
the filter.
Installation Procedure
Notice: Always re-attach the fuel lines and fuel filter with all original type
fasteners and hardware.
Do not repair sections of fuel pipes.
- Install the clamp to the fuel filter.
- Install the filter and clamp to the fuel pipes.
- Install the clamp bolt.
- Install the fuel filter
quick-connect fitting. Refer to
Plastic Collar Quick Connect Fitting Service
.
- Connect the negative battery cable.
- Lower vehicle.
- Inspect for fuel leaks through the following steps:
7.1. | Turn ON the ignition for 2 seconds. |
7.2. | Turn OFF the ignition for 10 seconds. |
7.3. | Turn ON the ignition. |
7.4. | Inspect for fuel leaks. |