Evaporative Emission Canister Vent Solenoid Valve Replacement Pickup
Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Lower the spare tire (underbody mounted spare tire only).
- Disconnect the vent valve electrical connector.
- Disconnect the vent hose
(1).
- Bend back the tang on the bracket.
- Remove the vent valve (3) from the bracket (2).
Installation Procedure
- Slide the vent valve (3)
onto the bracket (2).
- Connect the vent hose (1).
- Connect the electrical connector.
- Raise the spare tire (underbody mounted spare tire only).
- Lower the vehicle.
Evaporative Emission Canister Vent Solenoid Valve Replacement 2-Door Utility
Removal Procedure
- Raise the vehicle. Refer
to
Lifting and Jacking the Vehicle
in General Information.
- Lower the spare tire (underbody mounted spare tire only).
- Remove the shield (2) from the fuel tank shield (3).
- Disconnect the vent valve
electrical connector.
- Disconnect the vent hose
(3).
- Bend back the tang on the bracket.
- Remove the vent valve (1) from the bracket (2).
Installation Procedure
- Slide the vent valve (1)
onto the bracket (2).
- Connect the vent hose (3).
- Connect the vent valve
electrical connector.
- Install the shield (2)
to the fuel tank shield (3) with the retainers (1).
- Raise the spare tire (underbody mounted spare tire only).
- Lower the vehicle.
Evaporative Emission Canister Vent Solenoid Valve Replacement 4-Door Utility
Removal Procedure
- Turn OFF the ignition.
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the spare tire (underbody mounted spare tire only).
- Disconnect the evaporative emission (EVAP) canister vent valve
harness connector.
- Disconnect the vent hose
(1) from the EVAP canister vent valve (2).
- Release the tang on the vent bracket (4).
- Remove the vent valve (2) from the bracket (4).
Installation Procedure
- Slide the vent valve (2)
onto the bracket (4).
- Test the EVAP canister vent valve retention to the vent bracket
(4).
- Connect the EVAP vent hose (1) to the EVAP canister vent valve
(2).
- Connect the EVAP canister vent valve harness connector.
- Raise the spare tire (underbody mounted spare tire only).
- Lower the vehicle.