GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Sonoma Pickup - 2WD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Front Cable Replacement

Removal Procedure
  1. Raise the vehicle and support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 109 Size: SH
  2. Disconnect the right rear cable at the equalizer.
  3. Remove the park brake cable retainer.
  4. Remove the left hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side in Interior Trim.

    5. Object Number: 116 Size: SH
  5. Remove the retainer and the grommet.

    6. Object Number: 114 Size: SH
  6. Disconnect the cable from the lever.

    7. Object Number: 116 Size: SH
  7. Disconnect the front cable.

Installation Procedure

    Object Number: 116 Size: SH
  1. Install the front cable.

    2. Object Number: 114 Size: SH
  2. Connect the retainer and the grommet. All retaining fingers must be completely through the hole.
  3. Connect the cable to the lever.
  4. Install the left hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side in Interior Trim.

    5. Object Number: 116 Size: SH
  5. Install the retainer.

    6. Object Number: 109 Size: SH
  6. Connect the right rear cable to the equalizer and to the nut.
  7. Adjust the park brake cable. Refer to Park Brake Adjustment .
  8. Lower the vehicle.