GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the rear window garnish molding. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.

  3. Object Number: 293769  Size: SH
  4. Disconnect the electrical connector.
  5. Remove the cargo lamp assembly from the roof rear header garnish molding by prying out the assembly using a flat-bladed tool.

Installation Procedure


    Object Number: 293769  Size: SH
  1. Install the dome lamp assembly to the roof rear header garnish molding by pressing the assembly into position.
  2. Connect the electrical connector.
  3. Install the rear window garnish molding. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical