Removal Procedure
- Close the window.
- Remove the door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Peel back the corner of the water deflector in order to expose
the door handle screw access hole.
- Remove the outside door
handle screw access hole plug.
- Remove the outside door handle rod from the handle.
- Remove the screws that retain the outside door handle to the door
panel.
- Remove the outside door handle from the door.
Installation Procedure
- Install the outside door
handle to the door.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the screws
that retain the outside door handle to the door.
Tighten
Tighten the screws to 4 N·m (35 lb in).
- Install the outside door handle rod to the handle.
- Install the outside door handle screw access hole plug.
- Return the water deflector corner to the original position.
- Install the door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.