GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Sonoma Pickup - 2WD 🢒 Body and Accessories 🢒 Roof 🢒 Sunroof Glass Panel Replacement

Removal Procedure

    Important: The sunroof must be in the fully closed position prior to removing the glass panel.

  1. Open the sunshade panel.

    2. Object Number: 752282 Size: SH
  2. Remove the 4 screws (2) that retain the glass panel (1) to the sunroof assembly.
  3. Remove the glass panel from the top of the vehicle.

Installation Procedure

    Object Number: 752282 Size: SH
  1. Position the glass panel (1) to the vehicle.
  2. Install the screws (2) that retain the glass panel (1) to the sunroof assembly.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Adjust the glass panel height so that the glass is flush with the roof panel.

    4. Tighten
    Tighten the screws to 3 N·m (27 lb in).