GM Service Manual Online
For 1990-2009 cars only

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1413838  Size: SH
  1. Install 3  TORX® screws into the lock cylinder housing.
  2. Tighten
    Tighten the TORX® screws to 7N·m(62 lb in).

  3. Install the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Upper Bearing Inner Race - Assemble - Off Vehicle .
  4. Install the park lock cable into the lock cylinder housing.
  5. Install the ignition switch. Refer to Ignition and Key Alarm Switch Assembly - Assemble - Off Vehicle .
  6. Enable the SIR system. Refer to Enabling the SIR System in SIR.