Fuel Tank Pressure Sensor Replacement Utility/Crew Cab

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Relieve the fuel pressure. Refer to Fuel Pressure Relief .
3. Drain the fuel tank. Refer to Fuel Tank Draining .
4. Remove the fuel tank. Refer to Fuel Tank Replacement .
5. Disconnect the fuel tank pressure sensor electrical connector.
6. Remove the fuel tank pressure sensor (1) from fuel sender assembly (2)

1. Install the fuel tank pressure sensor (1) on the fuel sender assembly (2).
2. Connect the fuel tank pressure sensor electrical connector.
3. Install the fuel tank. Refer to Fuel Tank Replacement .
4. Refill the fuel tank.
5. Install the fuel filler cap.
6. Connect the negative battery cable.
7. Inspect for leaks.

7.1.	Turn ON the ignition for 2 seconds.

7.2.	Turn OFF the ignition for 10 seconds.

7.3.	Turn ON the ignition.

7.4.	Inspect for fuel leaks.

Fuel Tank Pressure Sensor Replacement Pickup

1. Remove the pickup box from the vehicle. Refer to Pickup Box Replacement in Body Rear End.



2. Disconnect the fuel tank pressure (FTP) sensor electrical connector.



3. Remove the FTP sensor.

1. Install the FTP sensor.



2. Install the FTP sensor electrical connector.
3. Install the pickup box. Refer to Pickup Box Replacement in Body Rear End.