SMU - SECTION 8A - 34 CRUISE CONTROL

SUBJECT: SERVICE MANUAL UPDATE - SECTION 8A-34 - CRUISE CONTROL - REVISED DIAGNOSTIC PROCEDURE - CRUISE CONTROL WILL NOT ENGAGE

MODELS: 1995 CHEVROLET AND GMC TRUCK S/T MODELS

THIS BULLETIN REVISES THE DIAGNOSTIC PROCEDURE, "CRUISE CONTROL WILL NOT ENGAGE," ON PAGES 8A-34-6 AND 8A-34-7 IN THE 1995 S/T SERVICE MANUAL BOOK 2 FINAL EDITION.

FIGURES: 0 ATTACHMENTS: 2

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.